|
|
|
|
|
Efficient, Self-Cleaning Dust Collector Design
The Monroe Cartridge Style Dust Collector is designed to provide continuous-duty collection and removal of airborne dust produced by manufacturing and processing operations at 99+% efficiency on many installations. Through the use of a Monroe Cartridge Style Dust Collector, these operations can discharge clean, filtered air back into the work area reducing climate control costs.
The Monroe Cartridge Style Dust Collector modular design incorporates high efficiency, pleated cartridge filters to achieve maximum filter surface area in a relatively small housing. The cartridges are designed to provide a low static pressure drop.
Cartridge cleaning is accomplished by reverse compressed air pulses through a few cartridges at a time, allowing continuous operation without shut-down. These reverse pulses, with a velocity of twice the speed of sound, break away caked dust from the cartridge so that it can drop the collector bottom.
Top Performance with Better Filter Cleaning
The cartridges in the Monroe collector are mounted in a vertical position. This assures that when the collected dust is pulsed from the cartridges, it falls to the bottom of the collector.
In units with horizontal cartridges, dust pulsed from above cartridges falls onto cartridges below. This reduces filtration capability and additional maintenance for rotating cartridge is necessary. This is avoided in the Monroe unit. The Monroe cartridges are easily accessed with pull out racks when replacement is necessary.
Broad Range of Industrial Dust Collection System Capacities
The Monroe Cartridge Style Dust Collector is available in capacities from 500 CFM to 50,000 CFM in a single unit and may be integrated with existing ductwork and ventilation systems.
An AMCA rated fan on the outlet side of the collector with either a direct coupled motor or an optional "V" belt drive.
Quiet Operation. Flexible duct connections, fan mounting isolators sound attenuators and fan closures are available.
Integral Pressure Gauges are available to indicate when filter maintenance is required.
Standard dust removal is via a slide gate. Options include rotary air locks or an integral screw conveyor.
Complete electrical controls are available to meet customer requirements.
Dust Collection System Design & Special Features
Heavy gauge steel is used for most installations, but special construction materials are available to meet specific applications. Welded seams and built-in lifting hooks provide rugged durability.
Large, easy to open access doors, each with air tight seals, are provided for inspection and cartridge servicing.
Monroe can provide complete ductwork systems from a variety of construction materials for each dry dust collector - including ductwork evaluation, recommendations, and design.
Many Dust Collector Configurations Available
The Monroe Cartridge Style Dust Collector can be configured to meet specific needs with options for most applications.
Dry Dust Collectors.pdf (434k)
